Adaptors for Water Purifiers

Description :
These Adaptors are designed to provide all the power requirements for Domestic RO/UV water purifiers application upto a power level of 36.0W , 48.0W ,54.0W ,60W. They have been designed to operate for wider AC Input range (100 - 440VAC) and to withstand the adverse Indian power conditions. They are designed with high frequency switching technology which makes them highly reliable, cost effective, and compact in size and light in weight.

Salient Features :
1. Wider AC input range from 150VAC to 440VAC makes it ideally suitable for Indian power conditions.
2. Innovative Design, High Reliability.
3. Protected against Over Load, Short Circuit, Over Voltage & Over Temperature
4. Works under low voltages and protects high voltage where the linear fails.
5 Compact size and light weight.
6. BIS approved products.

Specifications for Adapters for Water Purifiers

Specifications

Input Voltages: 100 - 300VAC
Input Current: 300mA rms
Input Frequency: 47HZ - 63HZ
Output Load Regulation: +/- 5% of output voltage
Output Voltages: 24V/ 36V / 48V
Output Current: 1.5A/2.0A/3.0A/4.0A/2.0A

Part Codes :

S No. Part Code Output Voltage Output Current AC Plug DC Plug
1 CDOK240150 24.0V 1.5A Integrated 3 pin Open Wire
2 DABA240150 24.0V 1.5A 3 pin Open Wire
3 DABA240200 24.0V 2.0A 3 pin Open Wire
4 DABA360150 36.0V 1.5A 3 pin Open Wire
5 EABA240250 24.0V 2.5A 3 pin Open Wire
6 EABA240300 24.0V 3.0A 3 pin Open Wire
7 EABA240400 24.0V 4.0A 3 pin Open Wire
8 EGFK480200 48.0V 2.0A 3 pin Open Wire
Download Brochure

Specifications for UV ballast/ Choke for Water Purifiers:

Specifications

Input Voltages: 24.0V DC
Input Current: 450mA rms
Input Frequency: 22 – 35 Khz
Output Load Regulation: 1200V
Output Voltages: 100VAC – 150VAC
Output Current: 4W,8W &11W ( With Lamp Fail Identification)

Part Codes :

S No. Part Code Output Power Input Plug Output Plug Remarks
1 JCAK260015 4W Open Wire open wire Lamp Fail Indication/ Buzzer
2 JAEK260033 11W Open Wire open wire
3 JBBK260033 11W Open Wire open wire Lamp Fail Indication/ Buzzer
4 HAEK260033 11W 7 Pin Connector 4 Pin Connector Open WireLamp Fail Indication/ Buzzer, Auto Flushing and SV Controller
5 HAEA260033 11W 5 Pin Connector 4 Pin Connector Lamp Fail Indication/ Buzzer and SV Controller
Download Brochure

Digital Products for water purifiers:



Filter Change Alarm with Auto Flush Circuit – AP Series:
• Programmable filter life from 400 to 950 Hrs. With 50 Hrs. Step Increment.
• Filter Life indication- LED & Audio Alarm
• 3 Stage Auto Flushing Controller
• Works for 24V/36V DC input with any polarity

Filter Change Alarm with Auto Flush Circuit – AR Series:



Filter Change Alarm with Auto Flush Circuit – AP Series:
• Programmable filter life for F1: 400 Hrs. & F2: 800 Hrs.
• Filter Life indication- LED & Audio Alarm
• 3 Stage Auto Flushing Controller
• LED indication for Auto Flushing, Purify, Tankful & Filter dicrimental Indications.

Auto Flush Circuit – AR Series:



Filter Change Alarm with Auto Flush Circuit – AP Series:
• 20/30 Sec. Auto flushing Controller.
• LED indication for power on & flushing.
• Works from 20.0 to 40.0V DC with any polarity.